Specifications:

• Knife Edge Design: Face side fabric panel meets the bottom fabric panel at the center of the front edge with single sewn seam.
• Solid Firm Foam:All foam and fiber filling material meet CAL-117 flammability standard (TB-117). Cushions manufactured to be in compliance with TB-117 would be expected to be resistant to small open flame and smoldering ignition sources, such as matches, lighters and candles. Cushions manufactured to be in compliance with TB-117 should not be considered to be "flame proof" TB-117 furniture will burn.
• Finishing: All cushions are manufactured with single-needle stitching and white nylon zippers. Velcro and security cables are available for an additional charge.

1. Remove the cushion from the furniture and place it on a flat surface to measure. Place the zippered side to the back, as if the cushion were sitting in the furniture frame.
   

Click here to return to Products page.

1. To measure depth (A): Depth is the space from the top of the cushion to the bottom. Place a ruler or flat cardboard on the cushion surface, slightly hanging over the edge and measure the distance between the top and bottom.
2. To measure width (B): Width is the space from one side of the cushion (as it rests in the furniture frame) to the other (i.e., from left to right). Use a tape measure, lay flat from one edge to the other. Place a ruler against the edge of the cushion, the measurement is where the tape measure meets the ruler.
3. To measure length (C): Length is the space from the zippered side (as it rests in the furniture frame) to the front edge of the cushion (i.e., from back to front). Use a tape measure, lay flat from one edge to the other. Place a ruler against the edge of the cushion, the measurement is where the tape measure meets the ruler.
4. To measure window seat cushions: Lay the cushion flat on a large sheet of paper. Trace the cushion to form a template. Measure each dimension using the instructions above (including depth which will not be obvious on the template). Include exact sizes for each measurement on your template. Or if possible, please send a sample cushion to use as a template. Note: There is a 1/8" tolerance in cushion measurements.