- All fabrics and linings are either inherently flame resistant or treated with a flame resistant finish. Flame certificates available upon request.
- Can be manufactured lined or unlined; however lining is recommended. Note: Blackout lining cannot be laundered, dry clean only.
- Fullness is typically 100%.
- All selvage edges will be removed or clipped prior to manufacturing.
- Multiple widths are joined with overlocked surged seams with safety stitch; using polyester corespun thread.
- Headings consist of 4" wide buckram folded into the fabric before stitching.
- Side hems will be 1-1/2" double turned folds.
- Hems will be blind stitched using thread in a compatible color. Mono filament thread is not acceptable.
- Bottom hems will be 4" double folded and will include a .25 oz. corner square lead weight.
- Pleats will be three point pinch pleats spaced approximately 3" - 5" apart.
- All joining seams will be concealed in the pleats.
- Uses a steel pin system that is hooked into the drapery hardware.
|
|
Draw Systems:
- Cord Draw: Can be specified with tension pulley to hold down cord for safety issues.
- Baton Draw: Baton can be hidden behind drapery if necessary.
- Hand Draw: No baton or cord is used; drapery is drawn by hand.
|
