Specifications:

• All fabrics and linings are either inherently flame resistant or treated with a flame resistant finish. Flame certificates are available upon request.
• Can be manufactured lined or unlined; however lining is recommended. Note: Blackout lining cannot be laundered dry clean only.
• Fullness is typically 150-200%.
• All selvage edges will be removed or clipped prior to manufacturing.
• Multiple widths are joined with overlocked surged seams with safety stitch; using polyester corespun thread.
• Drapery can be made with or without header.
• Side hems will be 1-1/2" double turned folds.
• Hems will be blind stitched using thread in a compatible color. Mono filament thread is not acceptable.
• Bottom hems will be 4" double folded and will include a .25 oz. corner square lead weight.
• Rod pockets are always 1" wider than the rod height (i.e., a 2-1/2" rod needs a 3-1/2" pocket).
• Available in wall mount only.

• Regular curtain rods.
• Continental Rods (2-1/2" or 4-1/2").
• Tension rods (for use when covering windows in doors, can be used on top and bottom of drapery).
• Decorative Pole.